메뉴 건너뛰기
2017.07.13 17:16
General Description The CYBLE-01201X-X0 is a Bluetooth Low Energy (BLE) wireless module solution. The CYBLE-01201X-X0 is a turnkey solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PRoC™ BLE. Refer to the CYBL10X6X datasheet for additional details on the capabilities of the PRoC BLE device used on this module. The CYBLE-01201X-X0 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-01201X-X0 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-01201X-X0 is available in a fully certified and qualified version (CYBLE-012011-00), and an uncertified version (CYBLE-012012-10). The CYBLE-012012-10 does not include an RF shield and is not certified by Bluetooth SIG or refulatory agencies. The CYBLE-01201X-X0 is a complete solution targeted at applications requiring cost optimized BLE wireless connectivity. Module Description ■ Module size: 14.52 mm ×19.20 mm × 2.00 mm (with shield) ■ Castelated solder pad connections for ease-of-use ■ 128-KB flash memory, 16-KB SRAM memory ■ Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output ■ Bluetooth 4.1 qualified single-mode module ❐ QDID: 79919 (CYBLE-012011-00 only) ❐ Declaration ID: D029885 (CYBLE-012011-00 only) ■ Certified to FCC, IC, MIC, KC, and CE regulations ■ Industrial temperature range: –40 °C to +85 °C ■ 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz ■ Watchdog timer with dedicated internal low-speed oscillator (ILO) ■ Two-pin SWD for programming Power Consumption ■ TX output power: –18 dbm to +3 dbm ■ Received signal strength indicator (RSSI) with 1-dB resolution ■ TX current consumption of 15.6 mA (radio only, 0 dbm) ■ RX current consumption of 16.4 mA (radio only) ■ Low power mode support ❐ Deep Sleep: 1.3 μA with watch crystal oscillator (WCO) on ❐ Hibernate: 150 nA with SRAM retention ❐ Stop: 60 nA with GPIO (P2.2) or XRES wakeup Functional Capabilities ■ Up to 22 capacitive sensors for buttons or sliders with best-in-class signal-to-noise ratio (SNR) and liquid tolerance ■ 12-bit, 1-Msps SAR ADC with internal reference, sample-and-hold (S/H), and channel sequencer ■ Two serial communication blocks (SCBs) supporting I2C (master/slave), SPI (master/slave), or UART ■ Four dedicated 16-bit timer, counter, or PWM blocks (TCPWMs) ■ LCD drive supported on all GPIOs (common or segment) ■ Programmable low voltage detect (LVD) from 1.8 V to 4.5 V ■ I2S master interface ■ Bluetooth Low Energy protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles ■ Switches between Central and Peripheral roles on-the-go ■ Standard Bluetooth Low Energy profiles and services for interoperability ■ Custom profile and service for specific use cases Benefits The CYBLE-01201X-X0 module is provided as a turnkey solution, including all necessary hardware required to use BLE communication standards. ■ Proven hardware design ready to use ■ Cost optimized for applications without space constraint, Footprint ❐ 14.52 × 19.20 mm × 2.00 mm - CYBLE-012011-00 ❐ 14.52 × 19.20 mm × 1.55 mm - CYBLE-012012-10 ■ Reprogrammable architecture ■ Fully certified module (CYBLE-012011-00) eliminates the time needed for design, development and certification processes ■ Bluetooth SIG qualified with QDID and Declaration ID (CYBLE-012011-00 Only) ■ Flexible communication protocol support ■ PSoC Creator™ provides an easy-to-use integrated design environment (IDE) to configure, develop, program, and test a BLE application
여기에 파일을 끌어 놓거나 파일 첨부 버튼을 클릭하세요.
파일 크기 제한 : 0MB (허용 확장자 : *.*)
파일 업로드 중... (0%)